Fitness device for pushing and pulling 2
The pushing and pulling device is designed for two persons, so one side is used to pull down the lever and the other to pull off the lever.
The supporting steel structure is made of steel Ø60mm profiles that start from the anchor plate and in the upper zone with a radial 160mm radius cross over one another and are bent in the same radius as well as to the squeegee on which they are mounted. From the central part of the Ø60mm profile, it is bent horizontally in a radius of 80mm, crosses the same radius to the other side and thus makes a compact support structure. The lever system is made of a Ø42mm profile as well as the two constructions on which it is seated. The seat and back of the two seats are made of PE three-layer laminated PE panel in two colors, 19mm thick with all rounded edges in 19mm radius. The entire steel construction is surface protected by plasticisation. In the lower parts of the structure are steel anchor bolts with screw openings for fixing the device to the concrete base with tips and screws.